| About |
|---|
| Recommended Applications: Lead-free general purpose injection molding compound. Manner M1480 is UL recognized under QMFZ8 and QMFZ2. This product complies with the European Union Restriction on Hazardous Substances (RoHS) directive.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.955 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 1.2 | g/10min | ISO 1133 |
| 190℃，5.0kg | 5.5 | g/10min | ISO 1133 |
| Gel content | |||
| Crosslinking level | > 65 | % | EN 579 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 1300 | MPa | ISO 527-2 |
| tensile strength | > 20.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 350 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 129 | ℃ | ASTM D1525 |
| Linear coefficient of thermal expansion | |||
| MD：20℃ | 1.5E-4 | 1/℃ | ASTM D696 |
| specific heat | |||
| 23℃ | 1900 | J/kg/℃ | ISO 11357 |
| Thermal conductivity coefficient | |||
| 23℃ | 0.46 to 0.48 | W/m/K | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 150 to 200 | °C | |
| Barrel 2 zone temperature | 150 to 200 | °C | |
| Barrel 3 zone temperature | 150 to 200 | °C | |
| Barrel 4 zone temperature | 150 to 200 | °C | |
| Barrel 5 zone temperature | 150 to 200 | °C | |
| Head temperature | 200 | °C | |
| Nozzle temperature | 210 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |