POLIGOM G/30 CS

About
POLIGOM : is a crosslinkable EPR/EPDM. POLIGOM G/30 CS : is a chemically crosslinkable rubber for low voltage cable insulation and sheathing. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst MAC/202-203 or MAC/100 SCU (more reactive). These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 95/5 Cerfity: HD221 S3 EI4-EI6, AS/NZS 3808:2000 X-90, R-E-110&&

About

POLIGOM : is a crosslinkable EPR/EPDM. POLIGOM G/30 CS : is a chemically crosslinkable rubber for low voltage cable insulation and sheathing. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst MAC/202-203 or MAC/100 SCU (more reactive). These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 95/5 Cerfity: HD221 S3 EI4-EI6, AS/NZS 3808:2000 X-90, R-E-110&&

Product Description
Generic	EPDM+SEBS
Material Status	Commercial: Active
Features	Crosslinked
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D792
Melt Flow Rate
190℃，5.0kg	1.0 to 5.0	g/10min	ASTM D1238

elastic body	Nominal value	Unit	Test method
Compression deformation
140℃，6 hr	< 45	%	IEC 60811

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air
150℃，168 hr	11	%	IEC 60811
Changes in tensile stress during fracture in air
150℃，168 hr	-13	%	IEC 60811

THERMAL	Nominal value	Unit	Test method
thermosetting			IEC 60811
250℃	70	%	IEC 60811
Residual：250℃	5.0	%	IEC 60811

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	> 1.0E+15	ohms·cm	IEC 60167

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	86		ASTM D2240
tensile strength
yield	> 10.0	MPa	IEC 60811
Tensile strain
fracture	> 500	%	IEC 60811

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	160	°C
Barrel 2 zone temperature	175	°C
Barrel 3 zone temperature	190	°C
Barrel 4 zone temperature	200	°C
Head temperature	210	°C
Nozzle temperature	215	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.