| About |
|---|
| Politen® G3TR10 is a Polyester Alloy material filled with glass fiber. It is available in North America. Important attributes of Politen® G3TR10 are: Flame Rated REACH Compliant RoHS Compliant&& |
| Product Description | |
|---|---|
| Generic | 间苯二甲酸聚酯 |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| MD, yield | 82.7 | MPa | |
| TD, yield | 57.2 | MPa | |
| bending strength | |||
| — | 177 | MPa | |
| — | 121 | MPa | |
| compressive strength | |||
| — | 209 | MPa | |
| — | 188 | MPa | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| TD | 360 | J/m | |
| flow | 380 | J/m |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| In oil | 12 | kV/mm | ASTM D149 |
| Relative permittivity | |||
| 1 MHz | 3.98 | ASTM D150 | |
| 1 MHz | 4.09 | IEC 60250 | |
| Dissipation factor | ASTM D150 | ||
| 1 MHz | 0.013 | ASTM D150 | |
| 1 MHz | 0.017 | ASTM D150 | |
| Arc resistance | ASTM D495 | ||
| — | 156 | sec | ASTM D495 |
| — | 137 | sec | ASTM D495 |
| breakdown voltage | ASTM D149 | ||
| — | 82500 | V | ASTM D149 |
| — | 39000 | V | ASTM D149 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Across Flow, Condition A |
| 3. Flow, Condition A |
| 4. Across Flow |
| 5. Flow |
| 6. Condition A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |