| About |
|---|
| Product Description | |
|---|---|
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 23℃ | 1.29 | ASTM D792 | |
| Melt Flow Rate | |||
| 260℃，2.16Kg | 18 | g/10min | ASTM D1238 |
| Mold Shrinkage | |||
| 3.2 mm | 0.1-0.3 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 23℃ | 121 | R | ASTM D-785 |
| Tensile Strength | |||
| Yield yld, 6 mm/min | 830 | kg/cm² | ASTM D638 |
| Elongation at break | |||
| 6 mm/min | 2.3 | % | ASTM D638 |
| Flexural Strength | |||
| 1.3 mm/min | 1200 | kg/cm² | ASTM D790 |
| 1.3 mm/min | 45000 | kg/cm² | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact | |||
| 23℃ | 58.8 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 120℃/hr | 95 | ℃ | ASTM D648 |
| Vicat Softening Temperature | |||
| 50℃/hr | 100 | ℃ | ASTM D1525 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Rating | |||
| 1.5 mm | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Processing Parameters | Nominal value | Unit | Test method |
| Drying Temperature | 90 | ℃ | |
| Drying Time | 4 | hr | |
| Barrel Temperature | 240-260 | ℃ | |
| Mold Temperature | 60-90 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |