| About |
|---|
| Polybutene-1 grade PB 0110M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible. It forms a 2-phase structure which is the basis of seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Foodlaw compliance information about this product can be found in separate product documentation.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PB |
| Material Status | Commercial: Active |
| Features | Good flexibility,High Heat Resistance,Hypocrystalline,High ESCR,Homopolymer,Quick wetting |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.914 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，10.0kg | 12 | g/10min | ISO 1133 |
| 190℃，2.16kg | 0.40 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 8986-2 | ||
| yield | 19.5 | MPa | ISO 8986-2 |
| fracture | 35.0 | MPa | ISO 8986-2 |
| Tensile strain | |||
| fracture | 300 | % | ISO 8986-2 |
| Bending modulus | 450 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | DSC | ||
| — | 117 | ℃ | DSC |
| — | 128 | ℃ | DSC |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 230 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Measured on specimens conditioned for 10 days at 20°C |
| 3. Tm2 |
| 4. Tm1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |