| About |
|---|
| POLYCHIM D 10 BS是一种聚丙烯均聚物(PP Homopoly)产品,。 它可以通过纤维（纺纱）挤出或注射成型进行加工,在欧洲有供货。 典型应用领域为:纺织/纤维。 主要特性为:均聚物。&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Weight distribution,Homopolymer |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 23 to 27 | g/10min | ASTM D1238 |
| Ash Content | 320 | ppm | ASTM D229 |
| colour | |||
| Yi | DIN 6167 | ||
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 29 | J/m | ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 81.0 | ℃ | |
| 1.8 MPa, unannealed | 49.0 | ℃ | |
| Vicat Softening Temp | |||
| — | 154 | ℃ | ASTM D1525 4 |
| — | 95.0 | ℃ | ASTM D1525 5 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Atactivity of xylene | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 109 | ASTM D785 | |
| tensile strength | |||
| yield | 34.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 15 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | < 1450 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |