Polyclear® Plus PET 1111

About
Polyclear® Plus PET 1111 from Indorama Ventures Polymers México, S. de R.L. de C.V. (“IVPM”), is a copolymer packaging resin with a nominal intrinsic viscosity of 0.84 dl/g. Packaging made from Polyclear® Puls PET 1111 provides excellent clarity, strength, and processing performance in maximum throughput, injection-stretch blow PET container applications. Polyclear® Plus PET 1111 is designed for fast injection cycle times and maximum blowing throughputs. In addition, preforms made from Polyclear® Plus PET 1111 exhibit low acetaldehyde levels while retaining high IV. Bottles made from Polyclear® Plus PET 1111 have excellent thermal stability characteristics and are durable under attack by caustic agents. Polyclear® Plus PET 1111 is recommended for use in carbonated soft drink bottles and for applications such as water bottles, food containers, and packaging for household goods. This PET resin complies with the Federal Food, Drug, and Cosmetic Act for certain food contact applications. Please contact IVPM for specific FDA clearances. Containers made from IVPM PET are lightweight, recyclable, have excellent clarity, and are shatterproof.&&

About

Polyclear® Plus PET 1111 from Indorama Ventures Polymers México, S. de R.L. de C.V. (“IVPM”), is a copolymer packaging resin with a nominal intrinsic viscosity of 0.84 dl/g. Packaging made from Polyclear® Puls PET 1111 provides excellent clarity, strength, and processing performance in maximum throughput, injection-stretch blow PET container applications. Polyclear® Plus PET 1111 is designed for fast injection cycle times and maximum blowing throughputs. In addition, preforms made from Polyclear® Plus PET 1111 exhibit low acetaldehyde levels while retaining high IV. Bottles made from Polyclear® Plus PET 1111 have excellent thermal stability characteristics and are durable under attack by caustic agents. Polyclear® Plus PET 1111 is recommended for use in carbonated soft drink bottles and for applications such as water bottles, food containers, and packaging for household goods. This PET resin complies with the Federal Food, Drug, and Cosmetic Act for certain food contact applications. Please contact IVPM for specific FDA clearances. Containers made from IVPM PET are lightweight, recyclable, have excellent clarity, and are shatterproof.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good Clarity,Renewable resources,Quick molding cycle,Food contact compliance,Copolymer,Heat Stabilized
Availabilitys	Latin America
Process Methods	Injection Stretch Blow Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	Internal Method
Apparent density
—	0.88	g/cm³
—	0.90	g/cm³
Intrinsic viscosity	0.84	dl/g	Internal Method
Acetaldehyde	0.50	ppm	Internal Method
Color b	-3.00		Internal Method
Crystallinity	53	%	Internal Method
water content	0.15	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting temperature	240	℃	Internal Method

Supplementary information	Nominal value	Unit	Test method
Chip Size		pcs/g	Internal Method
Fines	< 0.10	%	Internal Method
Yellow Chips	< 9.00	pcs/125 g	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. For 60 pellets/g
3. For 80 pellets/g
4. Determined by conversion of solution viscosity to intrinsic viscosity using an empirical correlation developed by Indorama Ventures Polymers México.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.