POLYCOMPO PE 2208J

About
POLYCOMPO PE 2208J is a High Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Containers. Characteristics include: Rigid Weather Resistant&&

Product Description
Supplier	POLYCOMPO
Generic	HDPE
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.964	g/cm³	ISO 1183
Melt Flow Rate	5.2	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
injection molding	4.00	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	7.2	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ASTM D746A , ISO 974
Vicat Softening Temp	130	℃	ASTM D1525 , ISO 306
Crystallization peak temperature
DSC	135	℃	ASTM D3418 , ISO 3146

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	65		ASTM D2240 , ISO 868
tensile strength			ISO 527-2
Yield, injection molding	28.0	MPa	ISO 527-2
Fracture, injection molding	17.0	MPa	ISO 527-2
Tensile strain
Fracture, injection molding	500	%	ISO 527-2
Bending modulus
injection molding	1300	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.