| About |
|---|
| POLYCOMPO PE 7800M是一种高密度聚乙烯产品,。 它可以通过挤出进行加工,在亚太地区有供货。 主要特性为:耐冲击。&& |
| Product Description | |
|---|---|
| Supplier | POLYCOMPO |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 0.040 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| Compression Molding | 600 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -60.0 | ℃ | ASTM D746A , ISO 812 |
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 , ISO 306 |
| Crystallization peak temperature | |||
| DSC | 132 | ℃ | ASTM D3418 , ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 65 | ASTM D2240 , ISO 868 | |
| tensile strength | ISO 527-2 | ||
| Yield, molding | 28.0 | MPa | ISO 527-2 |
| Fracture, molded | 32.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, molded | 500 | % | ISO 527-2 |
| Bending modulus | |||
| Compression Molding | 1200 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |