| About |
|---|
| Daikin PTFE F-201 is a polytetrafluoroethylene fine powder resin for paste extrusion manufactured without the use of PFOA. F-201 has been designed for spaghetti tubing, thin wall tubing and wire coating applications of less than 16 AWG that are run at high reduction ratios.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.16 to 2.20 | g/cm³ | ASTM D4895 |
| Apparent density | > 0.40 | g/cm³ | ASTM D4895 |
| Particle size | 400 to 650 | µm | ASTM D4895 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 25.0 | MPa | ASTM D4895 |
| Tensile strain | |||
| fracture | > 350 | % | ASTM D4895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |