Polyglue® LE102T

About
LE102T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite pipe & panel manufacturing system. LE102T has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility. Together with XLPE, HDPE and PE-RT, LE102T exhibits superior bond strength with various aluminum substrate and shows high stability with long-term thermo-cyclic test .&&

About

LE102T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite pipe & panel manufacturing system. LE102T has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility. Together with XLPE, HDPE and PE-RT, LE102T exhibits superior bond strength with various aluminum substrate and shows high stability with long-term thermo-cyclic test .&&

Product Description
Supplier	HYUNDAI EP
Generic	PE
Material Status	Commercial: Active
Features	Excellent Processability,Good bond,Good stability,Agglomerability
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.7	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	90.0	℃	ASTM D1525
Melting peak temperature	122	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Adhesive strength	> 4.9	kN/m	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	47		ASTM D2240
tensile strength
fracture	18.6	MPa	ASTM D638
Tensile strain
fracture	800	%	ASTM D638

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	170 to 180	°C
Barrel 2 zone temperature	180 to 190	°C
Barrel 3 zone temperature	190 to 200	°C
Barrel 4 zone temperature	200 to 210	°C
Barrel 5 zone temperature	200 to 210	°C
Melt temperature	190 to 210	°C
Nozzle temperature	200 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.