| About |
|---|
| POLYPRO® CB5108H是一种聚丙烯共聚物(PP Copoly)材料,。 该产品在亚太地区有供货,加工方式为:注射成型。 POLYPRO® CB5108H的主要特性有: 通过 ROHS 认证 高刚度 高光泽度 共聚物 耐冲击 典型应用领域包括: 房屋 电气用具 家庭应用 汽车行业 食品接触应用&& |
| Product Description | |
|---|---|
| Supplier | YUHWA |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good surface appearance,High impact resistance,High Heat Resistance,Block Copolymer,High scratch resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 10 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.4 to 1.8 | % | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 29 | J/m | ASTM D256 |
| 25℃ | 98 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 135 | ℃ | ASTM D648 |
| Vicat Softening Temp | 153 | ℃ | ASTM D1525 |
| Melting peak temperature | 167 | ℃ | ASTM D3418 |
| Relative temperature index | |||
| Electrical performance | 125 | ℃ | UL 746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 100 | ASTM D785 | |
| tensile strength | |||
| yield | 32.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 200 | % | ASTM D638 |
| Bending modulus | 1670 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |