| About |
|---|
| 5003N is halogen-free flame retardant environmental polypropylene with phosphorus and nitrogen as the flame retardant elements. Through synergistic effect of solidifying phase and gas-phase mechanism improve flame retardant performance, and accelerating melting and dripping by catalytic mechanism to play flame retardant perforamnce. 5003N flammability can reach UL94 V-2 (1.5mm and 3.0mm), glow-wire test meets GWIT:750/3.0 and GWFI:850/3.0. 5003N has passed UL certification and meet the requirements of RoHS, SVHC, 17P, Halogen-free, PAHs…etc. 5003N has the characteristics of low density of finished products, low smoke, less corrosion to the mould etc.&& |
| Product Description | |
|---|---|
| Supplier | POLYROCKS |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Low smoke,Halogen free,Flame Characteristics,Low density |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 15 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.1 to 1.5 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 26.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 50 | % | ASTM D638 |
| Bending modulus | 1200 | MPa | ASTM D790 |
| bending strength | 32.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 45 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 110 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-2 | ||
| 3.00 mm | V-2 | ||
| Glowing wire flammability index | |||
| 3.0 mm | 850 | ℃ | IEC 60695-2-12 |
| Igniting temperature of the hot wire | |||
| 3 mm | 750 | ℃ | IEC 60695-2-13 |
| Notes |
|---|
| 1. Phosphorus and Nitrogen |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |