| About |
|---|
| 5508(f1) is environmental flame retardant PP with bromine and antimony as main flame retardant elements. It improves flame retardant efficiency by synergistic effect of solid carbon, halogen-antimony synergistic mechanism. 5508(f1) flammability can reach UL94 V-0 and UL 1694 SC-0, ultraviolet radiation reach f1 level (UL746C), relative temperature index (RTI) is 120°C (UL746B). 5508(f1) has UL certification, and meets the requirements of RoHS, SVHC, PFOS & PFOA, 16P, Halogen-free, PAHs…etc. 5508(f1) has the characteristics of high flame retardant, low density, good processability, good weather resistance,strong chemical resistance, less corrosion to molds etc.&& |
| Product Description | |
|---|---|
| Supplier | POLYROCKS |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Halogen free,Flame Characteristics,Low density,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，2.16kg | 10 | g/10min | ASTM D1238 |
| Outdoor applicability | f1 | UL 746C | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 30.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 50 | % | ASTM D638 |
| Bending modulus | 1200 | MPa | ASTM D790 |
| bending strength | 30.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 20 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Relative temperature index | 120 | ℃ | UL 746 |
| Electrical performance | 120 | ℃ | UL 746 |
| Impact mechanical performance | 120 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75 mm | V-0 | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| — | SC-0 | UL 1694 |
| Notes |
|---|
| 1. Bromine and Antimony |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |