Polyrocks EP8400S90F-J1

About
Thermoplastic low-smoke halogen-free flame retardant polyolefin wire & cable compound is environmental flame retardant material with hydroxide as main flame retardant elements. Dehydration endothermic and carbonize play the flame retardant performance. Thermoplastic cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound, which Mechanical properties meet the requirements of LSZH coating of building wire, communication wire and power cable. The flammability reach IEC60332, grade A, B, and meet the requirements of ROHS, SVHC, PFOS & PFOA, 16P, Halogen, PAHs…etc.&&

Product Description
SupplierPOLYROCKS
GenericPE
Material StatusCommercial: Active
FeaturesExcellent Processability,Low smoke,Good Electrical Properties,Crosslinked,Halogen free,Flame Characteristics
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density1.42g/cm³
PH value5.2 

MECHANICALNominal valueUnitTest method
tensile strength12.4MPa
Tensile strain
fracture220%

Aging performanceNominal valueUnitTest method
The rate of change in tensile strength in air
100℃,168 hr-2.0%
The rate of change in ultimate elongation in air
100℃,168 hr-16%

THERMALNominal valueUnitTest method
Embrittlement temperature-40.0

Electrical performanceNominal valueUnitTest method
Volume resistivity
20 ℃2.8E+14ohms·cm
Dielectric strength25kV/mm

FLAME CHARACTERISTICSNominal valueUnitTest method
Extreme oxygen index31%
toxicity1.10 
Smoke density
Flame56 
Flameless140 

Supplementary informationNominal valueUnitTest method
Conductivity1.30µS/mm
Halogen Acid Gas Evolution0 

Notes
1. Hydroxide
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.