Polyrocks EP8400X105V-2

About
Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound is environmental flame retardant material with hydroxide as main flame retardant elements. Dehydration endothermic and carbonize play the flame retardant performance. Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound, which Mechanical properties meet the requirements of XLPE coating of electronic wire, automotive wire and photovoltaic wire, flammability reach UL1581 VW-1, and meet the requirements of ROHS, SVHC, PFOS & PFOA, 16P, Halogen, PAHs… etc.&&

Product Description
SupplierPOLYROCKS
GenericXLPE
Material StatusCommercial: Active
FeaturesLow smoke,Crosslinked radiation,Halogen free,Flame Characteristics
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density1.68g/cm³
PH value5.5 

MECHANICALNominal valueUnitTest method
tensile strength11.0MPa
Tensile strain
fracture170%

Aging performanceNominal valueUnitTest method
The rate of change in tensile strength in air
136℃,168 hr-4.0%
The rate of change in ultimate elongation in air
136℃,168 hr-15%

THERMALNominal valueUnitTest method
Embrittlement temperature-40.0

Electrical performanceNominal valueUnitTest method
Volume resistivity
20 ℃1.2E+14ohms·cm
Dielectric strength25kV/mm

FLAME CHARACTERISTICSNominal valueUnitTest method
Extreme oxygen index45%
toxicity1.20 
Smoke density
Flame52 
Flameless130 

Supplementary informationNominal valueUnitTest method
Conductivity1.20µS/mm
Halogen Acid Gas Evolution0.00mg/g

Notes
1. Hydroxide
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.