| About |
|---|
| POLYTROPE STR 3567EU resin is a medium gloss, weatherable, olefin cap resin providing exceptional durability. It is specifically designed for the co-extrusion process as a cap resin over POLYTROPE STR enhanced polyolefin TPO and FR TPO base resins. It is especially suited for thermoformed applications, as it maintains its’ smooth surface and uniform gloss through the thermoforming process. POLYTROPE STR 3567EU-01 CLEAR can be used as a clear cap or it can be easily colored. The durability of the cap resin enables it match or exceed the performance of acrylic resins, laminated films, and paint coatings.&& |
| Product Description | |
|---|---|
| Supplier | A. Schulman |
| Generic | PO增强 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,The fouling resistance,Renewable resources,Durability,Solvent resistance,low-temperature impact resistance,High scratch resistance,HB |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.898 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 42.1 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 233 ℃ | 200 | % | ISO 527-2 |
| Bending modulus | |||
| String, 23 ℃ | 2070 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart impact equipped with measuring instruments | |||
| 23℃，Total Energy，Ductile Failure | 46.3 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 92.2 | ℃ | ISO 75-2/Bf |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.20 mm | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, 3180 µ m, thermoplastic, smooth | 60 to 70 | ISO 2813 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A |
| 3. Type 1, 2.0 in/min |
| 4. Type 1A, 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |