| About |
|---|
| Polyvel’s PE-L01 masterbatch was designed to give PLA film and extruded sheet a matte finish by de-glossing the surface. The masterbatch is effective at low letdowns while maintain FDA food contact approval. Custom formulating is available on request for other additives in PLA. Used in: Film, Molding, and Extrusion Function: Matte Finish&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Biodegradable,Food contact compliance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Letdown | 0.50 to 1.0 | % | |
| Particle count | 50.0 | count/g | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |