PONACOM PS 5560

About
PONACOM PS 5560 is a High Impact Polystyrene product. It can be processed by injection molding and is available in Europe. Primary characteristic: impact resistant.&&

Product Description
Generic	PS (HIPS)
Material Status	Commercial: Active
Features	High impact resistance
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Melt Flow Rate
200℃，5.0kg	5.0 to 7.0	g/10min	ISO 1133
Water absorption rate
Saturation, 23 ℃	< 0.10	%	DIN 53495

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	6.5	kJ/m²	ISO 179/1
Impact strength of cantilever beam notch
23℃	8.0	kJ/m²	ISO 180-1

THERMAL	Nominal value	Unit	Test method
Melting temperature	180 to 240	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.