POTICON NTB935

About
The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs. Advantages Microscopic reinforcement Superior friction sliding and wear reduction Excellent dimensional accuracy and surface smoothness Highly recyclable Applications Automotive Parts (gears, bearings) LED Reflectors Watch Parts (gears, ground plane) Camera (image stabilization parts) Sliding Parts (gears, wheel bearing) Camera Module Parts Motor Parts (cog-wheels, bearings) NTB935 Property: Low water absorption, Heat-resisting property, High strength, Dimension accuracy&&

About

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs. Advantages Microscopic reinforcement Superior friction sliding and wear reduction Excellent dimensional accuracy and surface smoothness Highly recyclable Applications Automotive Parts (gears, bearings) LED Reflectors Watch Parts (gears, ground plane) Camera (image stabilization parts) Sliding Parts (gears, wheel bearing) Camera Module Parts Motor Parts (cog-wheels, bearings) NTB935 Property: Low water absorption, Heat-resisting property, High strength, Dimension accuracy&&

Product Description
Supplier	Otsuka
Generic	PA Not specified
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,Renewable resources,Low or no water absorption,Low coefficient of friction,Heat Resistance, Good
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.52	g/cm³	ASTM D792
Shrinkage rate
MD	0.40	%
TD	1.6	%
Water absorption rate
balance	0.18	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	30	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	1.5E-5	1/℃	ASTM D696
Hot deformation temperature	267	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	99		ASTM D785
tensile strength	113	MPa	ASTM D638
Tensile strain
fracture	2.0	%	ASTM D638
Bending modulus	11000	MPa	ASTM D790
bending strength	205	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	310 to 330	°C
Mold temperature	140 to 150	°C
Injection pressure	50.0 to 100	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.