| About |
|---|
| Silicone Rubber, HTV Insulators & Arresters, Energy & Electrical Engineering Insulators & Arresters, Electrical Industry&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Insulation,Electric mark |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | Grey, Light | ||
| Density | 1.55 | g/cm³ | ISO 1183 |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 to 75 | ISO 868 | |
| tensile strength | > 4.00 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | > 200 | % | ISO 37 |
| tear strength | > 11.0 | kN/m | ASTM D624-B |
| Arc resistance | > 300 | sec | IEC 61621 |
| Electrical strength | 23 | kV/mm | IEC 60243 |
| Relative permittivity | 3.70 | IEC 60250 | |
| Volume resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Dissipation factor | |||
| 50 Hz | 0.020 | IEC 60250 | |
| Tracking Resistance | 1A 4.5 | IEC 60587 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |