| About |
|---|
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 1.9 | g/10min | GB/T 3682.1-2018 |
| Ash Content | 0.0155 | % | GB/T 9345.1-2008 |
| Rockwell hardness | 85 | R | GB/T 3398.2-2008 |
| Mold shrinkage rate | |||
| flow | 1.5 | % | GB/T 17037.4-2003 |
| Lateral flow | 1.1 | % | GB/T 17037.4-2003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| yield | 24.5 | MPa | GB/T 1040.2-2006 |
| Bending modulus | 1163 | MPa | GB/T 9341-2008 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 43.2 | kJ/m² | GB/T 1043.1-2008 |
| -20℃ | 5.4 | kJ/m² | GB/T 1043.1-2008 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Load deformation temperature | |||
| Tf 0.45 | 79 | ℃ | GB/T 1634.2-2004 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |