PPO™ 843 resin

About
PPO™ 843 resin PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.&&

About

PPO™ 843 resin PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.&&

Product Description
Supplier	SABIC
Generic	PPO(PPE)+PS
Material Status	Commercial: Active
Features	Hydrolysis stability,Copolymer
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.476	g/cm³	ISO 1183
D	2.60		Internal Method
Intrinsic viscosity	0.40	dl/g	Internal Method
Average particle size	400.0	µm	Internal Method
Mn	14800		Internal Method
Mw	36000		Internal Method
Phenolic End（group Content）	1000	ppm	Internal Method
Tg（half width）	216	℃	Internal Method

Supplementary information	Nominal value	Unit	Test method
Toluene Content	< 1500	ppm	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.