PPR PA601 - SOLIAO

About
PPR PA601 is a Polyamide 6 (Nylon 6) product filled with 13% glass fiber. It is available in North America. Primary characteristic: heat stabilizer.&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.22	g/cm³	ASTM D792
Shrinkage rate
MD	0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	107	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus
tangent	5170	MPa	ASTM D790
bending strength	168	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	213	℃	ASTM D648
1.8 MPa, unannealed	193	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	71 to 82	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.20	%
Barrel rear temperature	238 to 282	°C
Barrel middle temperature	249 to 293	°C
Barrel front temperature	249 to 293	°C
Nozzle temperature	243 to 288	°C
Processing (melt) temperature	254 to 299	°C
Mold temperature	66 to 93	°C
Injection pressure	13.8 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.