PPR PS01 - SOLIAO

About
PPR PS01 is a General Purpose Polystyrene product. It is available in North America.&&

Product Description
Generic	PS (GPPS)
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	11	g/10min	ASTM D1238
Shrinkage rate
MD	0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	37.9	MPa	ASTM D638
Bending modulus
tangent	3030	MPa	ASTM D790
bending strength	55.2	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	21	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	87.8	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	77 to 88	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.020	%
Barrel rear temperature	177 to 218	°C
Barrel middle temperature	191 to 274	°C
Barrel front temperature	191 to 274	°C
Nozzle temperature	191 to 274	°C
Processing (melt) temperature	204 to 288	°C
Mold temperature	10 to 71	°C
Injection pressure	34.5 to 276	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.