| About |
|---|
| Product Description | |
|---|---|
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | High liquidity,Solvent resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.62 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24 hr | 0.02 | % | ISO 62 |
| Shrinkage rate | |||
| MD | 0.3 | % | ISO 294-4 |
| TD | 0.8 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 178 | MPa | ISO 527-1，2 |
| Tensile modulus | 15500 | MPa | ISO 527-1，2 |
| Tensile strain | |||
| fracture | 2.0 | % | ISO 527-1，2 |
| bending strength | 245 | MPa | ISO 178 |
| Bending modulus | 14500 | MPa | ISO 178 |
| Bending strain | |||
| fracture | 2.1 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 8 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | 37 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.80 MPa | 262 | ℃ | ISO 75-1，2 |
| Linear coefficient of thermal expansion | |||
| -50~50℃ | 1.5E-5 to 4.2E-5 | 1/K | ISO 11359-2 |
| 100～200℃ | 1.5E-5 to 11E-5 | 1/K | ISO 11359-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.36 | V-0 | UL 94 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Insulation failure strength | |||
| 1.0 mm | 25 | kV/mm | IEC 60243-1 |
| Dielectric constant | |||
| 1MHz | 4 | IEC 60250 | |
| Dielectric dissipation factor | |||
| 1MHz | 0.003 | IEC 60250 | |
| Resistance to leakage and marking index | 175 | V | IEC 60112 |
| Volume resistivity | 1.0E+15 | ohms.cm | IEC 60093 |
| Process Conditions | |||
|---|---|---|---|
| Processing temperature | Nominal value | Unit | Test method |
| Barrel temperature | 300-340 | ℃ | |
| Mold temperature | 130-150 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |