| About |
|---|
| Preformance® PET AQ01 is a Polyethylene Terephthalate (PET) material. It is available in North America for blow molding.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.90 | g/cm³ | Internal Method |
| Acetaldehyde | < 1.0 | ppm | Internal Method |
| Color b | -1.00 | Internal Method | |
| Color L | 85.0 | Internal Method | |
| Intrinsic viscosity | 0.76 | dl/g | Internal Method |
| water content | < 0.25 | % | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Black Specks | None | ||
| Dust | < 300 | ppm | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |