| About |
|---|
| PREPERM® 260 LDS is a special compound based on polyphenylene ether (PPE). It is designed for laser direct structuring applications, such as mobile phone and other antennas, and circuitry.&& |
| Product Description | |
|---|---|
| Supplier | Premix Oy |
| Generic | PPO(PPE) |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 300℃，5.0kg | 13 | g/10min | ISO 1133 |
| Shrinkage rate | 0.80 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-2 | ||
| yield | 62.0 | MPa | ISO 527-2 |
| 4 mm | 60.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 9.0 | % | ISO 527-2 |
| Fracture, 4 mm | 12 | % | ISO 527-2 |
| Bending modulus | |||
| 4 mm | 2800 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 12 | kJ/m² | ISO 180 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 45 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 177 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, unannealed | 158 | ℃ | ISO 75-2/Af |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1.00 GHz | 2.60 | Internal Method | |
| Dissipation factor | |||
| 1 GHz | 5.0E-3 | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 120 to 140 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Processing (melt) temperature | 290 to 310 | °C | |
| Mold temperature | 80 to 140 | °C | |
| Injection pressure | 60.0 to 80.0 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4 mm thickness |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |