| About |
|---|
| PRESEAL ® TPE 6070 is a novel thermoplastic elastomer based highly conductive compound intended primarily for EMI gasketing and grounding applications. Conductivity is achieved with a silver coated glass sphere and fibre combination. PRESEAL TPE 6070 can be injection moulded like an ordinary thermoplastic elastomer thus giving great new possibilities in gasket design and mass production. It has adhesion to selected thermoplastics and insert moulding to metal is also possible. This opens interesting construction possibilities with co-injection moulding e.g. moulding the gasket directly in the phone casing. Recyclability is an added value. The material is silicone free. Typical applications include soft EMI gaskets in mobile phones, mobile phone base stations and other wireless communication environment as well as military applications.&& |
| Product Description | |
|---|---|
| Supplier | Premix Oy |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Conductive,Renewable resources |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.85 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 55 | ISO 868 | |
| Bending modulus | 2.50 | MPa | ISO 178 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 0.300 | MPa | ISO 37 |
| yield | 0.400 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 120 | % | ISO 37 |
| yield | 13 | % | ASTM D412 |
| tear strength | 3.3 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 85℃，24 hr | 40 | % | ISO 815 |
| Compression modulus | ISO 7743 | ||
| At 10% compression | 0.0340 | MPa | ISO 7743 |
| At 15% compression | 0.0340 | MPa | ISO 7743 |
| At 18% compression | 0.0390 | MPa | ISO 7743 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 3.0E-3 | ohms·cm | Internal Method |
| Shielding effectiveness | |||
| 20 to 700 MHz | 100 | dB |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 | °C | |
| Drying time | 3.0 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ISO 37 |
| 3. Mil-G-83528 8 |
| 4. ARP 1705 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |