PRIMACOR™ 3540

About
PRIMACOR™ 3540 is an extrusion coating polymer. Main Characteristics: Extrusion coating adhesive polymer Coextrusion coating adhesive in combination with select INSITE™ Technology based polyethylene resins Enhanced adhesion retention Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European countries and in addition gives info about imposed migration requirements. Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.&&

About

PRIMACOR™ 3540 is an extrusion coating polymer. Main Characteristics: Extrusion coating adhesive polymer Coextrusion coating adhesive in combination with select INSITE™ Technology based polyethylene resins Enhanced adhesion retention Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European countries and in addition gives info about imposed migration requirements. Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EAA
Material Status	Commercial: Negative
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.936	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ASTM D1238
Co monomer content	8.5	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	29.4	℃	ASTM D1525
Melting temperature
DSC	36.7	℃	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	260 to 300	°C
Shrinkage – 25 g/m2 (290癈)	81.0	mm
Pulldown – Acceleration from 15 g/m2 at 100 m/min (290癈)	70	m/min

Notes
1. Typical properties: these are not to be construed as specifications.
2. Comonomer content measured by direct titration procedure.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.