PrimaFlex® EVA 3020

About
Description: EVA 3020 is commonly used for extrusion coating, coextrusion and specialty lamination applications. Processing Info: It is recommended that the melt temperature be kept below 210°C as EVA is known to degrade at higher temperatures. PrimaFlex® EVA 3020 will comply with all the appropriate requirements in paragraph (a) (1) of 21 CFR § 177.1350 Entitled Ethylene-vinyl acetate copolymers, of the United States Food, Drug and Cosmetic Act.&&

About

Description: EVA 3020 is commonly used for extrusion coating, coextrusion and specialty lamination applications. Processing Info: It is recommended that the melt temperature be kept below 210°C as EVA is known to degrade at higher temperatures. PrimaFlex® EVA 3020 will comply with all the appropriate requirements in paragraph (a) (1) of 21 CFR § 177.1350 Entitled Ethylene-vinyl acetate copolymers, of the United States Food, Drug and Cosmetic Act.&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	Food contact compliance,Copolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.937	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	30	g/10min	ASTM D1238
Vinyl acetate content	19.0	wt%

film	Nominal value	Unit
tensile strength
MD, fracture	15.0	MPa
TD, fracture	13.0	MPa
Tensile strain
MD, fracture	520	%
TD, fracture	610	%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	51.0	℃	ASTM D1525
Melting temperature	84.0	℃	DSC

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.