| About |
|---|
| POLYCARBONATE/ACRYLONITRILE BUTADIENE STYRENE Applications: Injection molding applications Cell phone cases General purpose Features: High flow Elevated HDT UL94 FR Rated; All Colors&& |
| Product Description | |
|---|---|
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | High liquidity,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | |
| Melt Flow Rate | |||
| 250℃，10.0kg | 40 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.50 to 0.80 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 53.8 | MPa | ASTM D638 |
| Bending modulus | 2340 | MPa | ASTM D790 |
| bending strength | 75.8 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 400 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 88.9 | ℃ | ISO 306 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| All colors | V-2 | ||
| 0.75 mm, all colors | V-1 | ||
| 1.50 mm, all colors | V-0 | ||
| 2.00 mm, all colors | |||
| 2.50 mm, all colors | 5VB | ||
| 3.00 mm, all colors | 5VA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. D-103 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |