| About |
|---|
| PRIMATOP® HDPE HMW 1000950 is a High Density (HMW) Polyethylene material. It is available in North America for blow molding. Important attributes of PRIMATOP® HDPE HMW 1000950 are: Copolymer Food Contact Acceptable High ESCR (Stress Crack Resistant) Impact Resistant Rigid Typical applications include: Engineering/Industrial Parts Food Contact Applications Tanks&& |
| Product Description | |
|---|---|
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,Food contact compliance,Good melt strength,Copolymer,High ESCR |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 10 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| F50 | > 600 | hr | ASTM D1693A |
| F50 | > 600 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 24.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 600 | % | ASTM D638 |
| Bending modulus | 1170 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -90.6 | ℃ | ASTM D746 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |