Prime ABS Weather-X 200

About
Is an acrylic capped co-extruded ABS sheet, which can be produced as a two or three multilayer composite. The acrylic cap imparts a very high gloss, vibrant colors with superior depth of image, excellent UV protection, chemical resistance, toughness and excellent formability. Applications: The performance features of Prime ABS Weather-X 200 make it the material of choice for applications, including marine, personal watercraft, recreational vehicles, lawn/garden, building/construction and automotive accessories. Processing: Surface Temp = 325-360°F Mold Temp = 150-175°F De-mold @ 170°F Mold shrink is .004-.008 in/in. ABS may absorb greater amounts of radiant energy than acrylic; thus, surface temperatures may increase more rapidly. Care should be taken to maintain the surface temperature at 325°F-360°F to avoid blistering, burning and color/gloss shift of the acrylic cap. Finishing: Prime ABS Weather-X 200 can be joined using mechanical methods such as bolts, screws or clamps, or chemical methods such as cementing. When drilling coextruded sheet with an acrylic modified drill bit, be sure to exit from the acrylic side but when drilling with a standard bit, be sure to have the bit exit from the substrate side. For accuracy and safety, Prime ABS Weather-X 200 should be clamped during drilling. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime ABS Weather-X 200 can be color matched to meet your specific requirements. The surface is typically high gloss but textures such as calf grain, H/C, F/L H/C, Levant 1 and Seville are available.&&

About

Is an acrylic capped co-extruded ABS sheet, which can be produced as a two or three multilayer composite. The acrylic cap imparts a very high gloss, vibrant colors with superior depth of image, excellent UV protection, chemical resistance, toughness and excellent formability. Applications: The performance features of Prime ABS Weather-X 200 make it the material of choice for applications, including marine, personal watercraft, recreational vehicles, lawn/garden, building/construction and automotive accessories. Processing: Surface Temp = 325-360°F Mold Temp = 150-175°F De-mold @ 170°F Mold shrink is .004-.008 in/in. ABS may absorb greater amounts of radiant energy than acrylic; thus, surface temperatures may increase more rapidly. Care should be taken to maintain the surface temperature at 325°F-360°F to avoid blistering, burning and color/gloss shift of the acrylic cap. Finishing: Prime ABS Weather-X 200 can be joined using mechanical methods such as bolts, screws or clamps, or chemical methods such as cementing. When drilling coextruded sheet with an acrylic modified drill bit, be sure to exit from the acrylic side but when drilling with a standard bit, be sure to have the bit exit from the substrate side. For accuracy and safety, Prime ABS Weather-X 200 should be clamped during drilling. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime ABS Weather-X 200 can be color matched to meet your specific requirements. The surface is typically high gloss but textures such as calf grain, H/C, F/L H/C, Levant 1 and Seville are available.&&

Product Description
Generic	ABS+PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good surface appearance,High impact resistance,Good color stability,High Heat Resistance,Good Tensile Strength,Solvent resistance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792
Melt Flow Rate
230℃，3.80kg	8.9	g/10min	ASTM D1238
Shrinkage rate
MD	0.30 to 0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	36.0	MPa	ASTM D638
Tensile strain
fracture	22	%	ASTM D638
Bending modulus	1930	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
0℃，3.2mm	230	J/m	ASTM D256
22℃，3.2mm	300	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, 3.2 mm	97.8	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
gloss
60°	87		ASTM D523

Supplementary information	Nominal value	Unit
De（mold Temperature）	77	℃
Mold temperature
other	66 to 79	℃
Surface Temperature	163 to 182	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.