| About |
|---|
| Prime Polypro™ J-3000GP是一种聚丙烯均聚物(PP Homopoly)产品,。 它可以通过注射成型进行加工,在北美洲、欧洲或亚太地区有供货。 主要特性为:均聚物。&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Homopolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.90 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 1.40-1.80 | % | ISO 294-4 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 30 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 96 | ℃ | ISO 75-2/Bf |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | HB | UL-94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 2.60 | kJ/m² | ISO 179/1eA |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 100 | R 级 | ISO 2039-2 |
| tensile strength | |||
| 23℃ | 36 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 34 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 1550 | MPa | ISO 527-2 |
| bending strength | |||
| 23℃ | 44 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 1550 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |