| About |
|---|
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Block Copolymer,Weather resistance is good,High impact resistance |
| Availabilitys | Asia Pacific,Europe,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 4.1 | g/10min | JIS K7210 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Impact strength of simply supported beams | |||
| 23℃ | 19 | kJ/m² | JIS K7111 |
| -20℃ | 5 | kJ/m² | JIS K7111 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 80 | ℃ | JIS K7191 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 80 | JIS K7202 | |
| Tensile Modulus | 1050 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Yield yld | 24 | MPa | JIS K7161 |
| Tensile Strain | |||
| Break | >200 | % | JIS K7161 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |