| About |
|---|
| Prime Polypro™ J105G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ J105G include household applications and industrial applications. Characteristics include: Homopolymer Rigid&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Homopolymer |
| Availabilitys | Asia Pacific,Europe,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 0.910 | g/cm³ | ISO 1183 | |
| Melt Flow Rate | |||
| 230℃ | 9.0 | g/10min | JIS K 7210 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength of simply supported beams | |||
| 23℃ | 4.0 | kJ/m² | JIS K 7111 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 100 | ℃ | JIS K 7191 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 105 | R Scale | JIS K 7202 |
| Tensile Modulus | 1650 | MPa | JIS K 7161 |
| Tensile Strength | |||
| Yield yld | 35.0 | MPa | JIS K 7161 |
| Tensile Strain | |||
| Break | > 200 | % | JIS K 7161 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |