| About |
|---|
| PRIME TPO R110MP is a Polypropylene Impact Copolymer (PP Impact Copolymer) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: copolymer.&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ISO 180 | ||
| -20℃ | 无断裂 | ISO 180 | |
| 23℃ | 无断裂 | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 60.0 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 68 | JIS K6253 | |
| tensile strength | |||
| fracture | 16.0 | MPa | JIS K6251 |
| Tensile strain | |||
| fracture | > 400 | % | JIS K6251 |
| Bending modulus | 30.0 | MPa | JIS K7203 |
| bending strength | 2.50 | MPa | JIS K7203 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 250g load |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |