| About |
|---|
| PrimePart® PLUS (PA 2221) is a refresh optimised polyamide 12 powder for processing in laser sintering systems. Therefore the need for new powder is considerably reduced, making PrimePart® PLUS economically very attractive. Laser sintered parts from PrimePart® PLUS are natural coloured and a little translucent. Properties economic multipurpose material balanced part properties Acceptance criteria biocompatibility according to ISO 10993-1 USP biological tests classification VI the single components comply with FDA, 21 CFR, §177.1500 (b) 9, excluding contact with alcohol-containing foods and beverages Typical applications functional parts&& |
| Product Description | |
|---|---|
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Biocompatible,Food contact compliance,High Heat Resistance,Grease resistance,Solvent resistance,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.970 | g/cm³ | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 3.9 | kJ/m² | ISO 179/1eA |
| 23℃ | 3.2 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 35 | kJ/m² | ISO 179/1eU |
| 23℃ | 18 | kJ/m² | ISO 179/1eU |
| 23℃ | 22 | kJ/m² | ISO 179/1fU |
| 23℃ | 61 | kJ/m² | ISO 179/1fU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 148 | ℃ | ISO 75-2/B |
| 0.45 MPa, unannealed | 157 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 70.0 | ℃ | ISO 75-2/A |
| 1.8 MPa, unannealed | 69.0 | ℃ | ISO 75-2/A |
| Melting temperature | 187 | ℃ | ISO 11357 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 75 | ISO 868 | |
| Tensile modulus | |||
| — | 1600 | MPa | ISO 527-2 |
| — | 1650 | MPa | ISO 527-2 |
| tensile strength | |||
| — | 47.0 | MPa | ISO 527-2 |
| — | 40.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 4.0 | % | ISO 527-2 |
| fracture | 16 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 1340 | MPa | ISO 178 |
| 23℃ | 1390 | MPa | ISO 178 |
| bending strength | |||
| 8.20% strain | 54.0 | MPa | ISO 178 |
| 8.40% strain | 59.0 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. X Direction |
| 3. Z Direction |
| 4. Y Direction |
| 5. 20°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |