| About |
|---|
| PrimePart® ST (PEBA 2301) is a natural coloured powder of a polyether block amide, which is developed and optimised for the application in a Laser Sinter system. Laser-sintered parts made from PrimePart® ST (PEBA 2301) possess excellent material properties: High elasticity and strength good chemical resistance excellent long-term stability high selectivity and detail resolution various finishing possibilities (e.g vibratory grinding, flame treatment, tub colouring, bond-ing, flocking) Typical applications of the material are fully functional, flexible plastic parts of highest quality. Due to the excellent mechanical properties the material is often used as a production material for long term use. The rubber-like fatigue behaviour qualifies Prime Part® ST (PEBA 2301) as excellent prototyping and series material.&& |
| Product Description | |
|---|---|
| Generic | TPA-ET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Good surface appearance,High elastic,High Heat Resistance,Fatigue resistance,Good stability,Solvent resistance,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 150 | ℃ | ISO 11357 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 35 | ISO 868 | |
| Tensile modulus | |||
| — | 80.0 | MPa | ISO 527-2 |
| — | 75.0 | MPa | ISO 527-2 |
| tensile strength | |||
| — | 8.00 | MPa | ISO 527-2 |
| — | 7.00 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 70 | % | ISO 527-2 |
| fracture | 200 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. X Direction |
| 3. Z Direction |
| 4. Y Direction |
| 5. 20°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |