PRL NY6-M25G15- (color)H

About
PRL NY6-M25G15- (color)H is a Polyamide 6 (Nylon 6) product filled with 15% glass fiber and 25% mineral. It can be processed by injection molding and is available in North America. Characteristics include: RoHS Compliant Heat Stabilizer Lubricated&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Lubricating,Heat Stabilized
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.40 to 0.90	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
Yield, 3.18 mm	131	MPa	ASTM D638
Fracture, 3.18 mm	131	MPa	ASTM D638
Bending modulus
3.18 mm	6890	MPa	ASTM D790
bending strength
3.18 mm	179	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed, 3.2 mm	227	℃	ASTM D648
1.8 MPa, unannealed, 3.2 mm	204	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	74 to 85	°C
Drying time	3.0 to 4.0	hr
Drying time, maximum	8.0	hr
Barrel rear temperature	232 to 249	°C
Barrel middle temperature	243 to 260	°C
Barrel front temperature	249 to 268	°C
Processing (melt) temperature	288 to 304	°C
Mold temperature	82 to 104	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.