| About |
|---|
| PRL PC-HH-UV是一种聚碳酸酯（PC）产品,。 它可以通过注射成型进行加工,在北美洲有供货。 特性包括: 通过 ROHS 认证 良好的抗紫外线能力 耐热 紫外线稳定&& |
| Product Description | |
|---|---|
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low liquidity,High Heat Resistance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 300℃，1.20kg | 2.0 to 5.0 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.60 to 0.80 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, 3.18 mm | 74.1 | MPa | ASTM D638 |
| Yield, 3.17 mm | 66.2 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.17 mm | 2140 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 96.5 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 370 | J/m | ASTM D256 |
| Drop hammer impact | |||
| 3.2 mm | 11.3 | J | ASTM D3029 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 146 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 3.2 mm | 154 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 121 to 129 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Drying time, maximum | 8.0 | hr | |
| Barrel rear temperature | 299 to 338 | °C | |
| Barrel middle temperature | 299 to 338 | °C | |
| Barrel front temperature | 327 to 371 | °C | |
| Processing (melt) temperature | 316 to 343 | °C | |
| Mold temperature | 77 to 99 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |