Pro-fax 6301 - SOLIAO

About
Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax 6301 Product Stewardship Bulletin (PSB). Please note that any additives compounded into this resin will require a re-assessment of its FDA status.&&

About

Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax 6301 Product Stewardship Bulletin (PSB). Please note that any additives compounded into this resin will require a re-assessment of its FDA status.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Food contact compliance,Homopolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.898	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	33.8	MPa	ASTM D638
Tensile strain
yield	10	%	ASTM D638
Bending modulus
1% secant	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	32	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	93.3	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.050 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.