Pro-fax 7523 - SOLIAO

About
Pro-fax 7523 Pro-fax 7523 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers good cold temperature impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 7523 For regulatory compliance information see Pro-fax 7523 Product Stewardship Bulletin (PSB).&&Pro-fax 7523 Profax 7523 is a medium impact polypropylene copolymer designed for injection molding applications; features include good impact resistance at low temperatures, excellent dimensional stability and a good stiffness/impact balance. Profax 7523 resin has a UL yellow card flammability rating of 94HB at a minimum thickness of 0.059 inches (1.5 mm). The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Good impact resistance Good heat-aging resistance Good stiffness High dimensional stability Typical Applications: Housewares Appliances Toys&&

About

Pro-fax 7523 Pro-fax 7523 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers good cold temperature impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 7523 For regulatory compliance information see Pro-fax 7523 Product Stewardship Bulletin (PSB).&&Pro-fax 7523 Profax 7523 is a medium impact polypropylene copolymer designed for injection molding applications; features include good impact resistance at low temperatures, excellent dimensional stability and a good stiffness/impact balance. Profax 7523 resin has a UL yellow card flammability rating of 94HB at a minimum thickness of 0.059 inches (1.5 mm). The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Good impact resistance Good heat-aging resistance Good stiffness High dimensional stability Typical Applications: Housewares Appliances Toys&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good heat aging resistance,High impact resistance,Good Dimensional Stability,Food contact compliance,low-temperature impact resistance,Impact copolymer,HB
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	4.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.0	MPa	ASTM D638
Tensile strain
yield	8.0	%	ASTM D638
Bending modulus	1130	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	87	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	92.8	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.50 mm, all colors	HB		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.