Pro-fax SL262MW

About
Profax SL262MW is a clarified random copolymer that provides good stiffness and low odor and taste transfer; it exhibits good clarity. SL262MW has a wide processing window that helps to reduce the melt temperature and cycle time contributing to energy savings. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Low odor and taste transfer Greater clarity and gloss than traditional grades Better product aesthetics Wide processing window Cycle time reduction and energy savings Good rigidity and impact resistance Typical Applications: Injection and extrusion blow-molding Thermoformed containers and lids Multilayer sheets&&

About

Profax SL262MW is a clarified random copolymer that provides good stiffness and low odor and taste transfer; it exhibits good clarity. SL262MW has a wide processing window that helps to reduce the melt temperature and cycle time contributing to energy savings. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Low odor and taste transfer Greater clarity and gloss than traditional grades Better product aesthetics Wide processing window Cycle time reduction and energy savings Good rigidity and impact resistance Typical Applications: Injection and extrusion blow-molding Thermoformed containers and lids Multilayer sheets&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Good surface appearance,High impact resistance,Quick molding cycle,Low odor,Food contact compliance,Random copolymer
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.5	MPa	ASTM D638
Tensile strain
yield	14	%	ASTM D638
Bending modulus	1010	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	320	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	82.2	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.