About DIOSHY® MP-885 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Asia Pacific.&& Product Description Supplier DIOSHY Generic SBS Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density…
About LL303 is a blend of LLDPE and LDPE which is designed to be drawn down to thin gauges while maintaining strengths. It is low slip intended for lamination purposes.&& Product Description Generic LDPE+LLDPE Material Status Commercial: Active Features Good…
About The fluoroplastic ETFE (copolymer of tetrafluoroethylene and ethylene) has extremely easy workability and flexibility, as well has excellent electrical and chemical properties. Because of its superior chemical, thermal, and electrical properties, in addition to the mechanical toughness (flexibility retention…
About Kraton G1654E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below. Kraton G1654 ES – supplied as a…
About M9001RW and Marvel M90 are linear-low density polyethylene (LLDPE) for rotational molding applications. M90 is a color compounded form. With excellent stiffness good impact strength and toughness.Both of them are suitable for rotational molding of large water tanks and…
About High Impact , good chemical resistance sheet grade ABS designed for refrigerator liner applications.&& Product Description Supplier SABIC Generic ABS Material Status Commercial: Active Features High impact resistance,Solvent resistance Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL…
About Adsyl 7624 XCP is an advanced polyolefin, specially designed for use as a sealing layer in co-extruded and metallizable film applications. This grade features a very low seal initiation temperature and excellent optics. It provides enhanced processability on high…
About Witcom POM-C 2012/300 EXP2 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Europe. Characteristics include: Flame Rated Copolymer&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Copolymer,Metal Detectable,HB…
About Hostalen GC 7260 LS is a high density polyethylene resin stabilized to prevent UV degradation. In addition to general injection molding applications such as toys, it is widely used in dust bin lids, crates, housewares and packaging. Hostalen GC…
About Product Description Supplier DS TECH Generic TPU Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.23±0.01 g/cm³ ASTM D792 Melt Flow Rate 215℃，10kg 30±10 g/10min ASTM D1238 Yellowing test 50℃ 4级 ASTM D1148…