About Product Description Supplier BASF Generic TPU-醚 Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.23 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method tensile strength fracture 50 MPa ISO 527-2 Tensile strain fracture…
About PBT alloy GF-reinforced / HB (0.75mm) equivalent per in-house testing, Low warpage & Low density, GF 40%&& Product Description Supplier Mitsubishi Generic PBT Alloy Material Status Commercial: Active Features Low warping,Low density Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About 30% Glass Fiber Reinforced Flame Retardant, Halogen Free Polyamide 6.6 for Injection Moulding applications.&& Product Description Supplier Ram-On Generic PA66 Material Status Commercial: Active Features Halogen free,Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods…
About Product Description Supplier EMERY Generic 润滑剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About MVR (300 °C kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release; injection molding – melt temperature 280 – 320 °C;…
About MDM54 is a UL recognised, V-2 rated halogen & phosphorus free flame retarded, mineral filled injection moulding grade of nylon 6, primarily intended for electrical applications.&& Product Description Supplier Teknor Apex Generic PA6 Material Status Commercial: Active Features Flame…
About TECHNYL B 738 MX15 Grey 3279 is a copolyamide 6.6, reinforced with 15% of mineral filler, for injection moulding. This grade offers good mechanical Properties, good superficial aspect and dimensional stability.&& Product Description Supplier DOMO Generic PA66/6 Material Status…
About NORYL PX1181 PolyPhenylene Oxide (PPO*) + Polystyrene (PS) resin is an unfilled , injection moldable grade, with improved impact performances, an ISO 306 Vicat B/120 temperature of 120 deg C and a UL94 HB rating . This grade has…
About VisiJet Techplast Plastic Material (gray color) provides an economical solution for general models. In addition, this material is commonly used for sacrificial patterns for numerous direct casting applications.&& Product Description Generic 3D打印材料 Material Status Commercial: Active Availabilitys North America,Asia…
About Veradel® PES 201 NT polyethersulfone is a tough, high-strength thermoplastics that are suitable for continuous use up to 356°F (180°C). Veradel® film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Veradel®…