About AXIALL’s Georgia Gulf MD-5009 is a rigid, fitting-grade PVC compound designed for hot spruce/runner molds, large parts and multi-cavity molds. This compound is characterized by excellent processability, which includes color hold, regrind stability and surface appearance. MD-5009 is NSF…
About Tekniflex® VA series are designed for thermoforming blister packaging for Pharmaceutical products requiring high barrier to moisture. Thermoformable into small/medium cavities; FDA, EU, USP & EP compliant, Pharmaceutical-grade PCTFE film lamination.&& Product Description Generic PVC+PCTFE Material Status Commercial: Active…
About Polypropylene homopolymer, 20% mineral fillers reinforced and medium melt flow rate. ISPLEN PM250 AX shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat stabilised specially designed for being in contact…
About Product Description Supplier SH shenma Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.4 g/cm³ ISO 1183 Shrinkage rate 0.3-0.9 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 200…
About TA 2125 HD catalyst masterbatch is used with Kafrit NA cross-linkable PEX-b compound TA 1108 HD to produce potable water tubing. TA 2125 HD contains a crosslinking catalyst which will complete the Sioplas System when extruded with PEX-b compounds…
About Hiprolon ® 90 NN LM is a stabilized polyamide 6.12 resin, specially designed for monofilament application. MAIN APPLICATIONS Monofilament Injection molding&& Product Description Supplier Arkema Generic PA612 Material Status Commercial: Active Features Good stability Availabilitys Africa & Middle East…
About Polyether block Pebax® Rnew® 80R53 SP 02 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. Percentage of renewable carbon…
About Our TPU “Mirakutoran ®” has the following outstanding features. Has excellent wear resistance Tensile strength, high mechanical strength and tear strength Is a wide range of hardness High impact strength Oil resistance and good chemical resistance Excellent low temperature…
About LIHAN® A9705NP is a Polyamide 66 (Nylon 66) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Lihan Generic PA66 Material Status Commercial: Active Availabilitys Asia Pacific…
About Vikalloy IM62 is an Acrylic (PMMA) + PVC (PMMA+PVC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Vikalloy IM62 are: Flame Rated Chemical Resistant Flame Retardant Impact Resistant Weather Resistant…