About TechnoCompound GmbH offers highly flexible biodegradable compounds under the name BioBatch. These polymers consist of biopolymers and special additives that are certified in accordance with DIN EN 13432 as well as ASTM D6400 by DIN CERTCO. Typical applications are…
About PC+POLYESTER, Injection Molding Transparency&& Product Description Supplier SABIC Generic PC + Polyester Material Status Commercial: Active Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.21 g/cm³ ASTM D792 Melt Flow Rate…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PAEK Material Status Commercial:…
About SEETEC M1500 is a polypropylene block copolymer for injection molding applications. It exhibits a good balance of stiffness and impact strength. This grade meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food…
About INSULCAST RTVS 3-95-2 is a very highly thermally conductive, high temperature RTV silicone compound which meets the flammability requirements of UL 94V-0.&& Product Description Generic 硅橡胶,RTV-2 Material Status Commercial: Active Features High Heat Resistance,Thermal conductivity,V-0 Availabilitys North America Technical…
About Tarnoform® 300 CF2 there is electrically conductive 10% carbon fibres reinforced injection- moulding grade with increased strength and stiffness. Available only in black colour.&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,HB Availabilitys Africa &…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…
About INNOPOL CS 1-4130 GF10 is a 20% talc and 10% glass-fibre filled compound based on polypropylene homopolymer. This grade is available in nature and custom coloured form as well. Recommended application INNOPOL ® CS 1-4130 GF10 is developed for…
About NuSil Technology’s restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average…
About VEGEMAT® is a composite material concept obtained by transforming all the aerial parts of corn with neither separation nor purification of their constituent parts. Thanks to its technical and chemical properties, this new bioplastique material based on corn, 100%…