About 40％gl / min，UL94 V-0等级。 不起泡阻燃,可用于断路器手柄/外壳,电机线圈外壳。 Product Description Supplier SABIC Generic polybutylene terephthalate Material Status Commercial: Active Features Good Dimensional Stability Technical Data MECHANICAL Nominal value Unit Test method tensile strength Fracture, 50 mm/min 101 MPa ASTM D638 bending strength…
About Applications: 55 gallon plastic drums, chemical tanks for agriculture, automobile gasoline tanks. Characteristics: The Exelene resin HDPE 5100M meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated “Olefin Polymers” from the Code of Federal Regulations of…
About EP reinforced Polybutylene Terephthalate-Polyethylene Terephthalate&& Product Description Supplier Shunyan Generic PBT+PET Material Status Commercial: Active Features HB Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density — 1.55 g/cm³ ASTM D792 23℃…
About MVR (300 °C kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; injection molding – melt temperature 280 – 320 °C; available in…
About Very High Viscosity, Lubricated&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features Ultra High Viscosity,Lubricating Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.13 g/cm³ ISO 1183 Water absorption rate Saturation, 23 ℃…
About Kraton D1162 B is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from South America in the physical form identified below. Kraton D1162 BT – supplied as a…
About Globalene® SF7351 is a Polypropylene Alloy (PP Alloy) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Globalene® SF7351 are: RoHS Compliant Good Processability Impact Resistant Low Shrinkage Typical applications include: Automotive…
About Glass Fiber – UL94 V-0&& Product Description Generic 液态聚合物 Material Status Commercial: Negative Features V-0,5VA Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.63 g/cm³…
About Product Description Generic PSU Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 110 MPa GB/1040 bending strength 130 MPa GB/9341 Bending modulus 0.65 MPa GB/9341 Tensile strain 2.3 % GB/1040 friction coefficient 0.45…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…